B6B6A充电器中文说明.pdf

1、B6ACB6AC TABLE OF CONTENTS INTRODUCTION.1 SPECIAL FEATURES.2 SPECIFICATIONS.5 .6 .7 .12 .14 .18 .19 .20 .21 .22 .23 .24 .25 .26 .27 .28 .29 .30 .31 .33 LITHIUM POLYMER BALANCE CHARGE PROGRAM CONNECTION DIAGRAM WARNING AND SAFETY NOTES PROGRAM FLOW CHART CHARGING OF LITHIUM BATTERY IN CHARGE MODE CHA

2、RGING OF LITHIUM BATTERY IN BALANCE MODE FAST CHARGING OF LITHIUM BATTERY STORAGE CONTROL OF LITHIUM BATTERY DISCHARGING OF LITHIUM BATTERY CHARGING OF NICD/NIMH BATTERY DISCHARGE OF NICD/NIMH BATTERY CHARGE/DISCHARGE AND DISCHARGE/CHARGE CYCLE OF NICD/NIMH BATTERY CHARGING OF THE PB BATTERY DISCHAR

3、GING OF THE PB BATTERY DATA STORAGE PROGRAM LOAD DATA PROGRAM VARIOUS INFORMATION IN THE PROGRAM WARNING AND ERROR MESSAGE WARRANTY AND SERVICE INITIAL PARAMETER SETUP (USERS SET UP) INTRODUCTION INTRODUCTION Thank you for purchasing the B6AC LiPo Balance Charger by iMAX.This product is a rapid char

4、ger with a high performance microprocessor and specialized operating software. Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist!

5、01 .Scroll through the Main Menu .Stop any charge processes Input power port 11-18V DC Alter values cells in balance charge mode See the status of individual .Resume or start charge processes .Confirm an action Balance lead sockets JST-XH ports LCD display (16 chr.* 2 lines) AC input power port (AC

6、100240V,50/60HZ) Output charge lead 4mm banana plug Temperature sensor port SPECIAL FEATURES SPECIAL FEATURES Optimized operating software B6AC features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the users fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product wer