叉车充电区设计安全要求.pptx

1、叉车充电区设计安全要求,2024-7-3,2,目录Brochure,1.充电间基本参数及方案 Charge room basic data and Plane Layout 1.1 冲压车间充电方案介绍 Stamping Charge room Introduction 1.2发动机车间充电方案介绍 Power Train Charge room Introduction 1.3 总装车间充电房方案介绍 Assembly Charge room Introduction 1.3a 总装南车间充电房方案介绍 South Assembly Charge room Introduction 1.3b

2、 总装东充充电电方案介绍 East Assembly Charge room Introduction2.充电房设计相关标准及其他配置 Charging stations design requirement and other configuration3.充电房案例 Charger rooms example,2024-7-3,3,用途 Usage 充电间主要用于给电池充电及存放电池，以及进行电池维护和保养，同时内部有加液装置、洗眼池和消防设施。Charging Room is mainly used to charge,storage and maintenance the batter

3、ies.Inside the room,also would equipped with adding liquid advice,eye washing pool and fire-fighting facilities.v说明 Basic Data 1、叉车型号 Forklift Type：3吨电动平衡重式叉车 3T Electric Forklift Trucks E30S X 8 units 6吨电动平衡重式叉车 6T Electric Forklift Trucks X 2 units2、充电机型号 Charger Type：DELONG D80/80P(E30S)3、电池型号 Ba

4、ttery Type：80 V/575 Ah(E30S),注意：因无法获得6吨电动平衡重叉车的电池型号及充电器型号，暂以E30S电池代替,1.1.1 冲压车间充电间基本情况1.1.1 Stamping Charge room basic data,2024-7-3,4,叉车电池及配套充电器参数表Forklift Battery&Charger Technical Data,1.1.2 叉车电池及充电器参数表冲压车间1.1.2 Battery&Charger performance,1,2,3,4,5,6,7,8,9,Stamping Charging Room,2024-7-3,5,1.1.3

5、 冲压车间整体平面规划图1.1.3 Stamping Plane Layout,充电机 Charger,备注 Remarks：,蓄电池加水设备Adding liquid device,洗眼池Eyes washing pool,平衡重叉车电池充电位 Battery,水槽 Drain,Forklift,Forklift,Hoisting Battery Area,10,2024-7-3,6,1.1.4 冲压车间整体立体图1.1.4 Stamping Plane Layout(3D),充电间内靠墙侧充电机挂墙摆置，电池可放置在托盘上。Chargers can hang on the wall,and

6、 the batteries put on the pallets.充电方式：备用电池连接充电机充电；电池充电完成后，采用吊装方式对叉车进行更换电池。Charging way:After the spare battery charging off,using the forklift to hoist the battery.可根据仓库的情况在充电区域设置洗眼池和蓄电池加水位。It can adjust the eyes washing pool and adding liquid location flexible base on the charging rooms space.,充电机Charging,电池 48V Battery,2024-7-3,7,1.2.1 发动机车间充电间基本情况1.2.1 Power Train Charge room basic data,用途 Usage 充电间主要用于给电池充电及存放电池，以及进行电池维护和保养，同时内部有加液装置、洗眼池和消防设施。Charging Room is mainly used to charge,storage a