叉车安全操作程序.docx

1、叉车安全操作程序1.PURPOSE 目的This procedure provides the minimum requirements for the safe operation offorklift trucks. It enhances the safety of all personnel involved in the operationof forklift trucks, and also others who may be working in close proximity toforklift trucks. 本程序提供最基本的叉车安全操作要求。旨在提高叉车操作人员以及叉

2、车附近其他工作人员的安全性。2.SCOPE 范围This procedure applies to all forklift truck operations on the terminalregardless of the ownership of the forklift trucks. 本程序适用于库区范围内所有叉车操作（无论何方所有） 。3.DEFINITION 定义3.1.Qualified Forklift Operator is an operator who has undergone therequired training on forklift operations an

3、d has the license issued by theinterrelated authority. 合格叉车操作人员指经相关叉车操作培训并拥有相关管理部门颁发的证书的操作人员。3.2.Flammable Liquids refer to products with flash point below 37.8OC. 易燃液体指闪点低于 37.8OC 的产品。4.RESPONSIBILITIES 职责4.1.It is the responsibility of the forklift operator to conform to the stipulatedsafety requi

4、rements on use of forklift. 叉车操作人员有责任遵守与叉车使用相关的安全要求。4.2.It is the responsibility of the line managers / supervisors to ensure thatonly trained operators are authorized to operate a forklift. 直接主管负责确保：只有经过培训的有资质的人员才能操作叉车。They shall also ensure that the forklift supplied by contractor are periodically

5、maintained and serviced. If the forklifts are to be used for handling offlammable liquid in drums, they should be installed with spark arrestingdevices such as arrestors, flame arrestor, air-start device, etc. In short, theseforklifts shall be designed for use in Class 1 Division 2 (or Zone 2) Class

6、ifiedHazardous Areas (refer to SHE-SWP-16). 并应确保承包商提供的叉车接受定期维修和保养。 若叉车用于桶装易燃液体搬运， 应安装阻火设备如阻火器、火焰防止器、气动装置等。简而言之，叉车应适用于危险区域分类1级 2 分区（参见 SHE-SWP-16） 。4.3.Contractor who supplies the forklifts is responsible to make the necessaryarrangements for any forklift repair or periodic servicing and inspection by themanufacturer so as to upkeep the safe operability of the forklift trucks. 提供叉车的承包商负责就制造厂家叉车维修或定期保养、检查服务进行必要的安排，以维持叉车的安全可操作性。5.SAFETY REQUIREMENTS 安全要求5.1.All forklift trucks must only be operated